ECOM Symbol ECOM Symbol

VER 100 Fresh Air Appliance

Top duct connection ERV, 105 cfm

Item Number: 463235

• For condos and 1-2 bedroom apartments or homes
• Removable screw terminal for easy connection
• Compatible with Fantech's low-voltage controls
• Three speed ventilation control
• Washable electrostatic filters
• Anti-microbial material
• Withstands freezing
• AHRI certified
Application

Fantech's VER 100 is a Fresh Air Appliance with energy recovery. It is designed for higher static pressure applications. The appliance provide up to 124 cfm of fresh air.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

Installation

The VER100 is easily installed with the supplied speed bracket.

Note: If you are using the appliance for a simplified installation, i.e. connecting appliance’s supply air duct to a furnace's return air duct, the appliance must operate continuously. In case it is turned off, the furnace will continue to draw in outdoor air directly into the furnace without re-heating or re-cooling. If the appliance is installed such that the homeowner may turn it off during the cold or hot seasons, we recommend installing a motorized damper ADC between the appliance’s supply air and the furnace's return air duct that closes when the appliance is not operating.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 168 W
Input current 1.4 A
Air flow 125.0 cfm
Air flow max 125.0 cfm
Static pressure 4 in.wg
Certificate CSA, HVI
Exchanger
Exchanger type Energy recovery (synthetic)
Used for
Installation placement Vertical
Images Wiring - VER 100 Fresh Air Appliance - Fantech
Speed Supply Temperature Net Airflow Net Effectiveness

Latent

Total

°F

°C

cfm

L/s

W

%

%

%

Heating

Low

35

1.7

50

24

50

63

47

58

Medium

35

1.7

75

35

92

61

44

55

High

35

1.7

100

47

130

59

41

53

Cooling

Low

95

35

50

24

50

63

43

51

Medium

95

35

75

35

95

60

40

48

High

95

35

100

47

130

59

37

45

Images Dimensions - VER 100 Fresh Air Appliance - Fantech
A B C D E F Duct size

21 1/2 (546)

14 1/2 (368)

15 5/8 (397)

17 8/9 (454)

22 1/2 (572)

15 (381)

5 (125) Oval

Dimensional information is in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

 

Energy Recovery Core

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 8.4 x 8.4” (213 x 213 mm) with a 15” (381 mm) depth.

 

Defrost

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The unit then returns to normal operation and continues cycle.

 

Serviceability

Core, filters, fans, drain pan and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 14” (432 mm) clearance.

 

Case

24 gauge galvanized pre-painted steel corrosion resistant

 

Insulation

Cabinet is fully insulated with 1” (25 mm) foil-face high density expanded polystyrene.

 

Filters

Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 12.5” (318 mm) x 0.125” (3mm).

 

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see controls)

 

Installation

Unit is typically installed using supplied wall bracket.

 

Warranty

5 years on energy recovery core, 7 year on motors, and 5 year on parts.

 

Requirements and standards

• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• Energy Recovery Core is ISO 846 certified for mold and bacteria resistance and AHRI certified (certificate #8931522)
• Technical data was obtained from published results of test relating to AHRI 1060 Standards
ADC 6 Shut-off Damper w Motor - Fantech Item Number: 44967 ADC 6 Shut-off Damper w Motor

6” motorized damper for circular ducts, 24V

.
COM5P Supply and Exhaust Hoods - Fantech Item Number: 40223 COM5P Supply and Exhaust Hoods

5" White Plastic Supply & Exhaust Hoods (pair)

.
ECO-Feel - Fantech Item Number: 414729 ECO-Feel

Dehumidistat & IAQ sensor, w/o display, 4 wire

.
ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

Touchscreen multi-function dehumidistat, 4 wires

.
FIDT 5 Insulated Flex Duct - Fantech Item Number: 411062 FIDT 5 Insulated Flex Duct

5" flexible duct, R4.2 Rating, 25ft

.
Filter,MERV6,100cfm,Repl.kit - Fantech Item Number: 414645 Filter,MERV6,100cfm,Repl.kit

MERV6 Filter kit, 100 cfm, 2 pcs

.
Filter,MERV8,100 cfm,Repl.kit - Fantech Item Number: 414923 Filter,MERV8,100 cfm,Repl.kit

MERV8 Filter kit, 100 cfm, 2 pcs, 8.4"x12.4"

.
MGE 5 Metal Exhaust Grill - Fantech Item Number: 411370 MGE 5 Metal Exhaust Grill

5" duct metal grille w/collar, exhaust

.
MGS 5 Metal Supply Grill - Fantech Item Number: 411369 MGS 5 Metal Supply Grill

5" duct metal grille w/collar, supply

.
RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 min timer w/battery

.