Ceiling-mounted ERV, 106 cfm

Item Number: 44940

• Airflow up to 106 cfm @ 0.4" PS serves 1 to 3 bedroom homes
• Slim design, only 8.75" (222 mm) high
• No drain required
• Easy to install ceiling bracket included

With a profile of only 8.75" high, the FIT® 120E is ideally suited for condos and apartments that have no mechanical room and where it must be located over a false ceiling.

How it works

The FIT® 120E brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from the incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

Technical parameters

Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 170 W
Input current 1.4 A
Air flow 50 L/s
Static pressure 100 Pa
Certificate CSA, HVI
Exchanger type Energy recovery (synthetic)
Dimensions and weights
Weight 41.9 lb
Used for
Installation placement False ceiling
Images Wiring - FIT® 120E ERV - Fantech
Heating Supply Temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)





32 (0)

65 (31)





32 (0)

85 (40)





32 (0)

98 (46)





5 (-15)

66 (31)






95 (35)

47 (22)



* Total recovery efficiency

Images Dimensions - FIT® 120E ERV - Fantech
A B C D E Duct diameter

30 1/2 (775)

19 (485)

8 3/4 (222)

2 (21)

1/2 (14)

5" oval

Dimensional information in inches (mm)


Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core 

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 11.5” x 11.5” (290 x 290 mm) with a 7.8” (198 mm) depth.

Frost Prevention 

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The unit then returns to normal operation, and continues cycle.


Core, filters, fans and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 8” (203 mm) clearance.


24 gauge G90 galvanized steel.


Insulated with 1 in. (25 mm) of foil-faced high density polystyrene foam an 0.25 in. (6 mm) of closed-cell foam on the top of the unit.


Two (2) washable electrostatic panel type air filters. Exhaust air filter dimensions 11.2” (284mm) x 7” (176 mm) x 0.125” (3mm). Supply air filter dimensions 11.4” (289mm) x 7.7” (196 mm) x 0.125” (3mm).


Unit is typically hung by using ceiling bracket supplied with unit. Optional chain kit available.


5 years on energy recovery core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• ERV Core ISO 846 certified for mold and bacteria resistance
• HVI certified
COM5P Supply and Exhaust Hoods - Fantech Item Number: 40223 COM5P Supply and Exhaust Hoods

COM5P Hottes en plastique

ECO-Feel - Fantech Item Number: 414729 ECO-Feel

ECO mode dehumidistat & IAQ sensor, no display,4 wire

ECO-TOUCH - Fantech Item Number: 414728 ECO-TOUCH

LCD touch, multi-function dehumidistat,new generation 4 wire

ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

LCD touch multi-function, IAQ sensing&wireless timer, 4 wire

EDF1 Multi-Func Ctrl - Fantech Item Number: 40375 EDF1 Multi-Func Ctrl

EDF1 Déshum multi-fonctions

Filter,MERV6,FIT,Exh,Repl.kit - Fantech Item Number: 414648 Filter,MERV6,FIT,Exh,Repl.kit

MERV6 Filter kit, FIT120, Exh. side, 2 pcs, 6.9"x11.18"

Filter,MERV8,FIT,Exh,Repl.kit - Fantech Item Number: 414926 Filter,MERV8,FIT,Exh,Repl.kit

MERV8 Filter kit, FIT120, Exh. side, 2 pcs, 6.9"x11.18"

Filter,MERV8,FIT,Sup,Repl.kit - Fantech Item Number: 414927 Filter,MERV8,FIT,Sup,Repl.kit

MERV8 Filter kit, FIT120, Supply side, 2 pcs, 7.7"x11"

MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

MDEH1 Déshumidistat

MGE5 Metal Exhaust Grill - Fantech Item Number: 411370 MGE5 Metal Exhaust Grill

MGE5 Grille d'évacuation métal

MGS5 Metal Supply Grill - Fantech Item Number: 411369 MGS5 Metal Supply Grill

MGS5 Grille d'air frais métal

RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 minute timer with battery - 28X80X132mm

RTS2 Pushbutton Timer - Fantech Item Number: 40164 RTS2 Pushbutton Timer

RTS2 Minuterie à bouton

RTS5 Pushbutton Timer - Fantech Item Number: 44794 RTS5 Pushbutton Timer

RTS5 Minuterie à bouton