ECOM Symbol

VER 200 Fresh Air Appliance

Item Number: 99286

• For large apartments and 3 to 5 bedroom homes
• Removable screw terminal for easy connection
• Compatible with Fantech's low-voltage controls
• Three speed ventilation control
• Washable electrostatic filters
• Anti-microbial material
• Withstands freezing
• AHRI certified
Application

Fantech's VER 200 is a Fresh Air Appliance with energy recovery. The product is designed for higher static pressure applications. Provides up to 200 cfm of fresh air.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

Installation

Four (4) handing chains with springs are used to hang VER200 to ceiling joists. The hardware pack comes with the product. To mount product on a wall, the wall mount (#422998) is needed. Purchased separately.

Note: If you are using the appliance for a simplified installation, i.e. connecting appliance’s supply air duct to a furnace's return air duct, the appliance must operate continuously. In case it is turned off, the furnace will continue to draw in outdoor air directly into the furnace without re-heating or re-cooling. If the appliance is installed such that the homeowner may turn it off during the cold or hot seasons, we recommend installing a motorized damper ADC between the appliance’s supply air and the furnace's return air duct that closes when the appliance is not operating

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 187 W
Input current 1.24 A
Air flow max 170.0 cfm
Static pressure 0.4 in.wg
Certificate CSA, AHRI
Exchanger
Exchanger type Energy recovery (synthetic)
Dimensions and weights
Weight 52.9 lb
Used for
Installation placement Vertical
Speed Supply Temperature Net Airflow Net Effectiveness

Latent

Total

°F

°C

cfm

L/s

W

%

%

%

Heating

Low

35

1.7

90

42

68

75

61

70

Medium

35

1.7

138

65

1274

71

54

64

High

35

1.7

170

80

180

69

59

62

Cooling

Low

95

35

90

42

68

75

58

64

Medium

95

35

138

65

124

71

50

58

High

95

35

170

80

180

69

46

55

A B C D Duct Size

28 (720)

17 (430)

20 1/2 (522)

22 11/16 (576)

6 (153)

Dimensional information is in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 11.4” x 11.4” (290 x 290 mm) with a 15” (381 mm) depth.

Serviceability

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

Case

24 gauge galvanized pre-painted steel corrosion resistant

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 11.75” (216mm) x 15” (380mm) x 0.125” (3mm).

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Warranty

5 years on energy recovery core, 7 year on motors, and 5 year on parts.

Requirements and standards

Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators

Complies with the CSA C22.2 no. 113 Standard applicable to ventilators

Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators

Energy Recovery Core is ISO 846 certified for mold and bacteria resistance and AHRI certified (certificate #8931522)

Technical data was obtained from published results of test relating to AHRI 1060 Standards

Defrost

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The unit then returns to normal operation and continues cycle.

ADC 6 Shut-off Damper w Motor Item Number: 44967 ADC 6 Shut-off Damper w Motor .
COM6P Supply and Exhaust Hoods Item Number: 40222 COM6P Supply and Exhaust Hoods .
ECO-TOUCH® Pgrm Wall Control Item Number: 44929 ECO-TOUCH® Pgrm Wall Control .
FIDT 6 Insulated Flex Duct Item Number: 411064 FIDT 6 Insulated Flex Duct .
FML6R Hood Riser MERV8 filter Item Number: 40418 FML6R Hood Riser MERV8 filter .
HS 6W External Louver Exhaust Item Number: 45153 HS 6W External Louver Exhaust .
MGE 6 Metal Exhaust Grill Item Number: 411371 MGE 6 Metal Exhaust Grill .
MGS 6 Metal Supply Grill Item Number: 411242 MGS 6 Metal Supply Grill .