ECOM Symbol ECOM Symbol

SHR 200 Fresh Air Appliance

Side duct connection HRV, 195 cfm

Item Number: 99225

• Airflow up to 195 cfm @ 0.4" PS serves 2 to 5 bedroom homes
• Side port connections
• Compatible with Fantech's low-voltage controls
Application

Fantech's side port connection HRV for budget conscious house projects. The SHR 200 is ideal for projects that demand a higher efficiency, the unit is designed for higher static pressure applications.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The SHR 200 is equipped with automatic defrost mechanisms so you can use your HRV all year long.

Defrost cycle

A preset defrost sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 240 W
Input current 2.3 A
Air flow 195 cfm
Static pressure 0.4 in.wg
Certificate CSA, HVI
Exchanger
Exchanger type Heat recovery (aluminium)
Dimensions and weights
Weight 59.5 lb
Used for
Installation placement Vertical
Images Wiring - SHR 200 Fresh Air Appliance - Fantech
Heating Supply temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

59 (28)

108

62

74

0.03

32 (0)

117 (55)

154

62

71

0.02

32 (0)

193 (91)

246

58

66

0.02

-13 (-25)

117 (55)

154

58

61

-0.01

Images Dimensions - SHR 200 Fresh Air Appliance - Fantech
A B C D

28 (710)

2 1/8 (55)

17 1/4 (438)

20 1/2 (522)

Dimensional information is in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Heat Recovery Core

Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 12” x 12” (305 x 305 mm) with a 15” (380 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations. 

Defrost

A preset frost control sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

Serviceability

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

Case 

24 gauge galvanized pre-painted steel corrosion resistant.

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 11.75” (298mm) x 15” (380mm) x 0.125” (3mm).

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Installation

Unit is typically hung by using installation kit supplied with unit. Mounting bolts provided on top four (4) corners of unit.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• HVI certified
COM6P Supply and Exhaust Hoods - Fantech Item Number: 40222 COM6P Supply and Exhaust Hoods

6" White Plastic Supply & Exhaust Hoods (pair)

.
ECO-Feel - Fantech Item Number: 414729 ECO-Feel

Dehumidistat & IAQ sensor, w/o display, 4 wire

.
ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

Touchscreen multi-function dehumidistat, 4 wires

.
FIDT 6 Insulated Flex Duct - Fantech Item Number: 411064 FIDT 6 Insulated Flex Duct

6" flexible duct, R4.2 Rating, 25ft

.
Filter,MERV8,200 cfm,Repl.kit - Fantech Item Number: 414922 Filter,MERV8,200 cfm,Repl.kit

MERV8 Filter kit, 200 cfm, 2 pcs, 11.5"x15"

.
FML6R Hood Riser MERV8 filter - Fantech Item Number: 40418 FML6R Hood Riser MERV8 filter

6" Intake air vent w/MERV8 filter

.
HS 6W External Louver Exhaust - Fantech Item Number: 45153 HS 6W External Louver Exhaust

6" duct plastic louver for exterior wall mount

.
MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

2-wire mechanical dehumidistat, low voltage

.
MGE 6 Metal Exhaust Grill - Fantech Item Number: 411371 MGE 6 Metal Exhaust Grill

6" duct metal grille w/collar, exhaust

.
MGS 6 Metal Supply Grill - Fantech Item Number: 411242 MGS 6 Metal Supply Grill

6" duct metal grille w/collar, supply

.
RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 min timer w/battery

.