Side Duct Connection HRV, 159 cfm
Item Number: 99213
Fantech's side port connection HRV for budget conscious house projects. The SHR 150 is ideal for projects that demand a higher efficiency, the unit is designed for higher static pressure applications.
The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The SHR 150 is equipped with automatic defrost mechanisms so you can use your HRV all year long.
A preset defrost sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.
|Exchanger type||Heat recovery (aluminium)|
|Dimensions and weights|
23 3/4 (604)
2 1/8 (55)
17 1/4 (438)
16 1/4 (414)
Dimensional information is in inches (mm)
Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.
Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 9” x 9” (229 x 229 mm) with a 15” (380 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.
A preset frost control sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.
Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.
24 gauge galvanized pre-painted steel corrosion resistant.
Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.
Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 15” (380mm) x 0.125” (3mm).
External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)
Unit is typically hung by using installation kit supplied with unit. Mounting bolts provided on top four (4) corners of unit.
Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.
6" White Plastic Supply & Exhaust Hoods (pair)MSRP
Dehumidistat & IAQ sensor, w/o display, 4 wireMSRP
Touchscreen multi-function dehumidistat, 4 wiresMSRP
6" flexible duct, R4.2 Rating, 25ftMSRP
MERV6 Filter kit, 150 cfm, 2 pcsMSRP
MERV8 Filter kit, 150 cfm, 2 pcs, 8.5"x15"MSRP
6" Intake air vent w/MERV8 filterMSRP
6" duct plastic louver for exterior wall mountMSRP
2-wire mechanical dehumidistat, low voltageMSRP
Wireless 20/40/60 min timer w/batteryMSRP