This product has been discontinued
This product was replaced by  SHR 1200 Heat Rec Ventilator

SHR 11005R Heat Rec Ventilator

Side duct connection HRV, 1032 cfm, recirculation defrost

Item Number: 41048

• Airflow up to 1032 cfm @ 0.4" PS
• Push-pull configuration
• External low voltage contacts
• Dual service doors & reversible electrical box
• External three position switch (Low/Standby/Medium)
Application

The SHR 11005R Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings.

How it works

Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.

Defrost cycle

During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the building can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy.

Technical parameters

Unit
Frequency 60 Hz
Voltage (nominal) 120 V
Phase(s) 1~
Input current 11 A
Input power 1,320 W
Static pressure 0.4 in.wg
Heat exchanger
Exchanger type Heat recovery (aluminium)
Others
Installation placement Horizontal
Dimensions and weights
Weight 260.1 lb
Certificates
Certificate AHRI, CSA
Supply temperature Net airflow Sensible effectiveness

°F (°C)

cfm (L/s)

%

Heating

35 (1.7)

1035 (488)

56

35 (1.7)

776 (366)

61

Cooling

95 (35)

1035 (488)

47

95 (35)

776 (366)

49

A B C D E F G J

51 2/5 (1306)

47 1/5 (1199)

20 (508)

8 (203)

24 1/5 (615)

22 (559)

46 1/2 (1181)

36 1/4 (921)

Dimensional information is in inches (mm)

Fans

Four (4) factory balanced fans with backward curved blades. Motors come with permanently lubricated sealed ball bearings and (TOP) thermal overload protected and maintenance-free operation.

Heat recovery core 

Fantech manufactures this fixed plate cross-flow heat exchanger using new 1100 alloy aluminum. Heat exchanger is engineered with a turbulence inducing geometry in order to maximize heat transfer while allowing an effective evacuation of condensate. The plates are hemmed and sealed to ensure no cross-contamination of airstreams. The aluminum core had a plastic handle for easy removal. The unit features three cores, each 12" x 12" (305 mm x 305 mm) with a 15" (380 mm) depth.

Defrost

During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the building can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost.

Serviceability 

Cores, filters and drain pan can be accessed easily from both sides of the HRV from hinged access panels. Cores conveniently slide out with only 15" (380 mm) clearance. Blowers can be accessed from both side of the HRV from fastened access panels. Blowers are easily removed by taking off the access panel and sliding the motor plates out of the HRV. A quick connect allows for fast inspection of blowers.

Case

24 gauge galvanized steel. Baked power-coated paint for a superior adhesion and resistance.

Insulation

Insulated with 1in. (25 mm) fiberglass with FSK facing for condensation control.

Filters

The exhaust and fresh air streams are protected by MERV1 washable filters constructed to meet UL 900. Optional MERV6 filters are direct replacement to the MERV1. Use of MERV6 filters will add an additional system pressure of 0.28in.wg (70 Pa) at 1100 cfm (519 l/s).

Controls 

External three (3) position (Reduced/Stand By/Normal) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Mounting 

Unit may be suspended by using threaded rod, not supplied, or placed on a platform. Unit shall be adaptable for easy service of electrical components. 

Warranty

Limited lifetime on aluminum core, 3 years on motors, and 3 years on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Technical data was obtained from published results of test relating to AHRI 1060 Standards
EDF1R Multi-Func Ctrl w Recirc - Fantech Item Number: 40393 EDF1R Multi-Func Ctrl w Recirc

Low-Intermittent-Recirculation-High Wall Control

.
EDF7 Electronic Dehumidistat - Fantech Item Number: 44883 EDF7 Electronic Dehumidistat

multi-function, surface mount

.
Filter,MERV8,1100-1400,Repl.ki - Fantech Item Number: 414934 Filter,MERV8,1100-1400,Repl.ki

MERV8 Filter kit, LC, 1100-1400cfm, 6 pcs, 11.5"x15"

.
IR 4 Iris Damper - Fantech Item Number: 411234 IR 4 Iris Damper

4" iris damper w/manual adjuster

.
IR 5 Iris Damper - Fantech Item Number: 411235 IR 5 Iris Damper

5" iris damper w/manual adjuster

.
IR 6 Iris Damper - Fantech Item Number: 411236 IR 6 Iris Damper

6" iris damper w/manual adjuster

.
IR 8 Iris Damper - Fantech Item Number: 411237 IR 8 Iris Damper

8" iris damper w/manual adjuster

.
MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

2-wire mechanical dehumidistat, low voltage

.
MGE 4 Metal Exhaust Grill - Fantech Item Number: 411106 MGE 4 Metal Exhaust Grill

4" duct metal grille w/collar, exhaust

.
MGE 5 Metal Exhaust Grill - Fantech Item Number: 411370 MGE 5 Metal Exhaust Grill

5" duct metal grille w/collar, exhaust

.
MGE 6 Metal Exhaust Grill - Fantech Item Number: 411371 MGE 6 Metal Exhaust Grill

6" duct metal grille w/collar, exhaust

.
MGE 8 Metal Exhaust Grill - Fantech Item Number: 411244 MGE 8 Metal Exhaust Grill

8" duct metal grille w/collar, exhaust

.
MGS 4 Metal Supply Grill - Fantech Item Number: 411368 MGS 4 Metal Supply Grill

4" duct metal grille w/collar, supply

.
MGS 5 Metal Supply Grill - Fantech Item Number: 411369 MGS 5 Metal Supply Grill

5" duct metal grille w/collar, supply

.
MGS 6 Metal Supply Grill - Fantech Item Number: 411242 MGS 6 Metal Supply Grill

6" duct metal grille w/collar, supply

.
MGS 8 Metal Supply Grill - Fantech Item Number: 411243 MGS 8 Metal Supply Grill

8" duct metal grille w/collar, supply

.
Replacement filter kit, MERV13 - Fantech Item Number: 414937 Replacement filter kit, MERV13

Replacement filter kit, MERV13, (1100-1400 cfm)

.
RTS2 Pushbutton Timer - Fantech Item Number: 40164 RTS2 Pushbutton Timer

20 minutes push-button timer

.
RTS3 Pushbutton Timer - Fantech Item Number: 40376 RTS3 Pushbutton Timer

Electronic 20/40/60 minutes timer

.