ECOM Symbol ECOM Symbol

SH 704 Fresh Air Appliance

Side duct connection HRV, 56 cfm, w/o control

Item Number: 463800

• Airflow up to 56 cfm @ 0.4" PS serves 1-2 bedroom homes
• Single speed ventilation; no controls needed
• Includes easy-mount wall bracket
Application

Fantech's smallest and most compact side duct connection HRV, the SH 704 unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air.

How it works

During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The SH 704 is equipped with automatic defrost mechanisms so you can use your HRV all year long.

Defrost cycle

Unit is designed to operate continuously on a single speed. The automatic defrost cycle consists of a fan shutdown. When the supply air stream temperature goes below 23°F, the supply motor shuts down while the exhaust motor continues to ventilate. Ambient air is passed through the unit for a period of 3 or 5 minutes. The supply motor will then re-start and run at the preset speed.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 48 W
Input current 0.4 A
Air flow 56 cfm
Static pressure 0.4 in.wg
Certificate HVI, CSA
Exchanger
Exchanger type Heat recovery (aluminium)
Dimensions and weights
Weight 24.3 lb
Used for
Installation placement Horizontal
Images Wiring - SH 704 Fresh Air Appliance - Fantech
Heating Supply temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

55 (26)

36

57

67

-

32 (0)

67 (32)

40

55

63

-

32 (0)

84 (39)

40

54

60

-

-13 (-25)

73 (34)

35

53

66

-

Images Dimensions - SH 704 Fresh Air Appliance - Fantech
​Model A B C D E

SE704N

19 3/4 (502)

18 1/2 (470)

10 11/16 (271)

10 3/16 (259)

17 1/4 (438)

Dimensional information is in inches (mm).

Motor

Two (2) factory-balanced motors with backward curved blades. Motors come with permanently lubricated sealed ball bearings guarantee long life and maintenance-free operation. Seven (7) year warranty. Steep fan curves requires no balancing of airflows.

Core Aluminum heat recovery

core covered by a limited lifetime warranty. Core dimensions are 8.5” x 8.5” (216 x 216 mm) with a 8” (203 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.

Defrost

The automatic defrost cycle consists of a fan shutdown. When the supply air stream temperature goes below 23°F (-5°C), the supply motor shuts down while the exhaust motor continues to ventilate. Ambient air is passed through the unit for a period of 3 or 5 minutes. The supply motor will then re-start and run at the preset speed. This fan shutdown defrost cycle continues until the supply air stream rises above 23°F (-5°C).

Serviceability

Core, filters, motors and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 10˝ (250mm) of clearance is recommended for removal of core.

Duct

4˝ (100mm) steel duct connections with rubber gasket for easy sealing.

Case

24 gauge galvanized steel. Baked power-coated paint for a superior adhesion and resistance.

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 8” 203mm) x 0.125” (3mm).

Controls

Unit is designed to operate continuously on a single speed. See FTD 7 under accessories or contact Tech Support for possible intermittent, linevoltage options

Drain

1/2” (13mm) OD (outside diameter) drain spout provided, entire bottom of unit covered by drain pan.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

COM4P Supply and Exhaust Hoods - Fantech Item Number: 40369 COM4P Supply and Exhaust Hoods

4" White Plastic Supply & Exhaust Hoods (pair)

.
FIDT 4 Insulated Flex Duct - Fantech Item Number: 411061 FIDT 4 Insulated Flex Duct

4" flexible duct, R4.2 Rating, 25ft

.
Filter,MERV6,70 cfm,Repl.kit - Fantech Item Number: 414644 Filter,MERV6,70 cfm,Repl.kit

MERV6 Filter kit, 70 cfm, 2 pcs, 8"x8.5"

.
Filter,MERV8,70 cfm,Repl.kit - Fantech Item Number: 414921 Filter,MERV8,70 cfm,Repl.kit

MERV8 Filter kit, 70 cfm, 2 pcs, 8"x8.3"

.
FTD7 7 Day Digital Timer - Fantech Item Number: 49792 FTD7 7 Day Digital Timer

7-day programmable digital timer, 15A

.
MATRIX 6, 2 in 1 Vent Hood - Fantech Item Number: 413640 MATRIX 6", 2 in 1 Vent Hood

tandem, supply/exhaust hood, 6” duct

.
MGE 4 Metal Exhaust Grill - Fantech Item Number: 411106 MGE 4 Metal Exhaust Grill

4" duct metal grille w/collar, exhaust

.
MGS 4 Metal Supply Grill - Fantech Item Number: 411368 MGS 4 Metal Supply Grill

4" duct metal grille w/collar, supply

.