ECOM Symbol ECOM Symbol

SER 150 Fresh Air Appliance

Side duct connection ERV, 144 cfm

Item Number: 99209

• Airflow up to 145 cfm @ 0.4" Ps serves 2 to 5 bedroom homes
• Removable screw terminal for easy connection
• Compatible with Fantech's low-voltage controls
• Three speed ventilation control
• Washable electrostatic filters
• Optional drain line
• Anti-microbial material
• Withstands freezing
• AHRI certified
Application

Fantech's SER 150 is an Energy Recovery Ventilator designed for higher static pressure applications.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

Note: If you are using the appliance for a simplified installation, i.e. connecting appliance’s supply air duct to a furnace's return air duct, the appliance must operate continuously. In case it is turned off, the furnace will continue to draw in outdoor air directly into the furnace without re-heating or re-cooling. If the appliance is installed such that the homeowner may turn it off during the cold or hot seasons, we recommend installing a motorized damper ADC between the appliance’s supply air and the furnace's return air duct that closes when the appliance is not operating

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 171 W
Input current 1.4 A
Air flow 144 cfm
Static pressure 0.4 in.wg
Certificate CSA, AHRI
Exchanger
Exchanger type Energy recovery (synthetic)
Dimensions and weights
Weight 48.5 lb
Used for
Installation placement Vertical
Images Wiring - SER 150 Fresh Air Appliance - Fantech
Speed Supply Temperature Net Airflow Consumed Power Net Effectiveness

Sensible

Latent

Total

°F

°C

cfm

L/s

W

%

%

%

Heating

Low

35

1.7

75

35

88

62

44

55

Medium

35

1.7

115

54

120

59

41

53

High

35

1.7

150

71

171

56

37

50

Cooling

Low

95

35

75

35

88

62

40

50

Medium

95

35

115

54

120

59

37

46

High

95

35

150

71

171

56

33

42

Images Dimensions - SER 150 Fresh Air Appliance - Fantech
A B C D

23 3/4 (604)

2 1/8 (55)

17 1/4 (438)

16 1/4 (414)

Dimensional information is in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core 

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 9” x 9” (229 x 229 mm) with a 15” (381 mm) depth.

Defrost

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The unit then returns to normal operation and continues cycle.

Serviceability

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

Case 

24 gauge galvanized pre-painted steel corrosion resistant.

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 15” (380mm) x 0.125” (3mm).

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Warranty

5 years on energy recovery core, 7 year on motors, and 5 year on parts.

Requirements and standards 
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Energy Recovery Core is ISO 846 certified for mold and bacteria resistance and AHRI certified (certificate #8931522)
• Technical data was obtained from published results of test relating to AHRI 1060 Standards
ADC 6 Shut-off Damper w Motor - Fantech Item Number: 44967 ADC 6 Shut-off Damper w Motor

6” motorized damper for circular ducts, 24V

.
COM6P Supply and Exhaust Hoods - Fantech Item Number: 40222 COM6P Supply and Exhaust Hoods

6" White Plastic Supply & Exhaust Hoods (pair)

.
ECO-Feel - Fantech Item Number: 414729 ECO-Feel

Dehumidistat & IAQ sensor, w/o display, 4 wire

.
ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

Touchscreen multi-function dehumidistat, 4 wires

.
FIDT 6 Insulated Flex Duct - Fantech Item Number: 411064 FIDT 6 Insulated Flex Duct

6" flexible duct, R4.2 Rating, 25ft

.
Filter,MERV6,150 cfm,Repl.kit - Fantech Item Number: 414647 Filter,MERV6,150 cfm,Repl.kit

MERV6 Filter kit, 150 cfm, 2 pcs

.
Filter,MERV8,150 cfm,Repl.kit - Fantech Item Number: 414924 Filter,MERV8,150 cfm,Repl.kit

MERV8 Filter kit, 150 cfm, 2 pcs, 8.5"x15"

.
MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

2-wire mechanical dehumidistat, low voltage

.
MGE 6 Metal Exhaust Grill - Fantech Item Number: 411371 MGE 6 Metal Exhaust Grill

6" duct metal grille w/collar, exhaust

.
MGS 6 Metal Supply Grill - Fantech Item Number: 411242 MGS 6 Metal Supply Grill

6" duct metal grille w/collar, supply

.
RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 min timer w/battery

.