ECOM Symbol ECOM Symbol

SER 1100 Energy Rec Vent

Art. no.: 99277

• Airflow up to 1179 cfm @ 0.4" PS
• Push-Pull configuration
• Removable screw terminal for easy connection
• Dual service doors & reversable electrical box
• External three position switch (Low/Standby/High)


Fantech® commercial energy recovery ventilators (ERV) models provide cost-effective energy savings while delivering ventilation to buildings in a compact product.

Applications include classrooms, retails shops, hair salons, bars and restaurants, offices, clinic, and animal sheters, etc.

How it works

The exchanger tempers the outdoor air before supplying it to the building by recovering the energy in the building’s air before exhausting it. In summer, the ERV will pre-cool and reduce moisture in the ventilation air while in winter it will pre-heat and recover moisture. We designed our commercial energy recovery ventilators to operate in both warm and humid climates and in very cold climates.

In stock earliest delivery 29.02.19 Show availability
  • Aug 29, 2018
  • Sep 09, 2018
  • 500
  • 500

Technical parameters

Frequency 60 Hz
Voltage (Nominal) 120 V
Phase(s) 1~
Input current 11.17 A
MCA 13.75 A
MOP 15 A
Input power 1,340 W
Air flow max 1,178.0 cfm
Static pressure 0.4 in.wg
Dimensions and weights
Weight 209.9 lb
Certificate CSA, AHRI
Supply Temperature Net Airflow Net Effectiveness




°F (°C)

cfm (L/s)





35 (1.7)

840 (396)




35 (1.7)

630 (297)





95 (35)

840 (396)




95 (35)

360 (297)




A B C D E F G I J K Drain Spout

51 2/5 (1306)

47 1/5 (1199)

20 (508)

3 (76)

8 (203)

8 (203)

36 1/4 (921)

22 (559)

32 1/2 (826)

1/2 (13)

Dimensional information is in inches (mm)


Four (4) factory balanced fans with backward curved blades. Motors come with permanently lubricated sealed ball bearings and (TOP) thermal overload protected and maintenance-free operation.

Energy recovery core

Three (3) modular AHRI certified energy recovery cores made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 11.5" x 11.5" (290x 290 mm) with a 15" (380 mm) depth.


A preset frost control sequence is initiated if the outdoor temperature falls below the set point of 23°F (-5°C). During the initial stage, the supply blower shuts down & the exhaust blower switches into high speed to eliminate frost build-up in the core. The unit then returns to normal operation for the final stage of the frost control sequence at which time the sequence is repeated if the outdoor air temperatures is still below the set point.


Cores, filters and drain pan can be accessed easily from both sides of the ERV from hinged access panels. Cores conveniently slide out with only 15" (380 mm) clearance. Blowers can be accessed from both side of the ERV from fastened access panels. Blowers are easily removed by taking off the access panel and sliding the motor plates out of the ERV. A quick connect allows for fast inspection of blowers.


22 gauge galvanized steel. Baked powder coated paint.


Insulated with 1in. (25 mm) fiberglass with FSK facing for condensation control.


The exhaust and fresh air streams are protected by MERV1 washable filters constructed to meet UL 900. Optional MERV6 filters are direct replacement to the MERV1. Use of MERV6 filters will add an additional system pressure of 0.64 in.wg (160 Pa) at 1100 cfm (519 l/s). Additional MERV Rated filters available upon request.


If outdoor air temperature is above 32°F (0°C) at the extract air (30% RH/72°F, 30% RH /22°C), no drain line installation is required. If this is the case keep the drain spout as shipped from factory with the cap.


External three (3) position (Low/Stand By/High) rocker switch that will offer continuous ventilation. In addition Fantech offers a variety of external controls.


Unit may be suspended by using threaded rod, not supplied, or placed on a platform. Unit shall be adaptable for easy service of electrical component.


3 years on all parts

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Technical data was obtained from published results of test relating to AHRI 1060 Standards
CO2RT-R Transmitter Art. no.: 99315 CO2RT-R Transmitter $ 585.00 (MSRP)
ECO-TOUCH® Pgrm Wall Control Art. no.: 44929 ECO-TOUCH® Pgrm Wall Control $ 145.00 (MSRP)
EDF1 Multi-Func Ctrl Art. no.: 40375 EDF1 Multi-Func Ctrl $ 50.00 (MSRP)
EDF7 Elec Multi-Funct Dehum Art. no.: 44883 EDF7 Elec Multi-Funct Dehum $ 85.00 (MSRP)
EFD 20-8, Damper, TFB24 Art. no.: 99304 EFD 20-8, Damper, TFB24 $ 497.00 (MSRP)
IR 4 Iris Damper Art. no.: 411234 IR 4 Iris Damper $ 75.00 (MSRP)
IR 5 Iris Damper Art. no.: 411235 IR 5 Iris Damper $ 75.00 (MSRP)
IR 6 Iris Damper Art. no.: 411236 IR 6 Iris Damper $ 80.00 (MSRP)
IR 8 Iris Damper Art. no.: 411237 IR 8 Iris Damper $ 90.00 (MSRP)
MDEH1 Low Voltage Dehumidistat Art. no.: 40172 MDEH1 Low Voltage Dehumidistat $ 25.00 (MSRP)
MGE 4 Metal Exhaust Grill Art. no.: 411106 MGE 4 Metal Exhaust Grill $ 21.00 (MSRP)
MGE 5 Metal Exhaust Grill Art. no.: 411370 MGE 5 Metal Exhaust Grill $ 26.00 (MSRP)
MGE 6 Metal Exhaust Grill Art. no.: 411371 MGE 6 Metal Exhaust Grill $ 26.00 (MSRP)
MGE 8 Metal Exhaust Grill Art. no.: 411244 MGE 8 Metal Exhaust Grill $ 36.00 (MSRP)
MGS 5 Metal Supply Grill Art. no.: 411369 MGS 5 Metal Supply Grill $ 26.00 (MSRP)
MGS 6 Metal Supply Grill Art. no.: 411242 MGS 6 Metal Supply Grill $ 26.00 (MSRP)
MGS 8 Metal Supply Grill Art. no.: 411243 MGS 8 Metal Supply Grill $ 36.00 (MSRP)
RTS2 Pushbutton Timer Art. no.: 40164 RTS2 Pushbutton Timer $ 25.00 (MSRP)
RTS5 Pushbutton Timer Art. no.: 44794 RTS5 Pushbutton Timer $ 45.00 (MSRP)