Fantech
 
ECOM Symbol ECOM Symbol

FSD 18 Square Inline Fan

18" square inline duct fan w/metal housing, 120V, 1~

Item #: 40035

• Mixed-flow impeller enabling high static pressure
• Operable in air stream temperatures up to 140°F
• UL listed and AMCA Air & Sound certified
• Comes with fan brackets for quick & easy installation
• Five-year warranty

Technical parameters

Nominal data
Voltage (nominal) 115 V
Rated voltage 115 to 120 V
Frequency 60 Hz
Phases 1~
Input power 462 W
Input current 4.7 A
Impeller speed 1,698 rpm
Air flow max 2,494 cfm
Capacitance of capacitor 40 µF
Temperature of transported air max 140 °F
Max temperature of transported air, when speed controlled 140 °F
Protection/Classification
Enclosure class, motor IP54
Insulation class F
Dimensions and weights
Rectangular, height, inlet 18 x 18 in.
Rectangular, width, inlet 18 x 18 in.
Weight 52.5 lb
Images Wiring - FSD 18 Square Inline Fan - Fantech
A-A B-B GND F R E P L N

Motor leads

Supply

Ground

Brown

Blue

Black

Capacitor

Line

Neutral

CFM Table

Model

0.0" Ps

0.2" Ps

0.4" Ps

0.6" Ps

0.8" Ps

1.0" Ps

1.5" Ps

2.0" Ps

2.5" Ps

3.0" Ps

FSD 18

2486

2344

2160

1950

1435

1204

157

-

-

-

FSD 20

3400

3218

2965

2675

2315

1898

890

-

-

-

FSD 22

4970

4800

4600

4350

4100

3780

2630

1200

-

-

FSD 26

7128

6934

5730

6463

6205

5909

4980

3780

2315

922

Images Dimensions - FSD 18 Square Inline Fan - Fantech
Model A B

FSD 18

17 5/8 (448)

15 3/4 (400)

FSD 20

19 3/4 (502)

17 3/4 (451)

FSD 22

21 1/2 (546)

19 (483)

FSD 26

26 (660)

20 (508)

Dimensions in inches (mm)

GUIDE SPECIFICATION

Specifier Notes: This guide specification is written in Construction Specifications Institute (CSI) 3-Part Format in accordance with The CSI Construction Specifications Practice Guide, MasterFormat, SectionFormat, and PageFormat.

Specifier Notes: This Section must be carefully reviewed and edited by the Architect or Engineer to meet the requirements of the Project and local building code. Coordinate this Section with Division 01, other specification sections, and the Drawings. Delete all Specifier Notes after editing this Section.

Section numbers and titles are based on MasterFormat 2014 Update.

SECTION 23 34 00

HVAC FANS

Specifier Notes: This Section covers Fantech FSD Series square inline duct fans with alternating current (AC) motors. Consult Fantech for assistance in editing this Section as required for the Project.

PART 1. GENERAL

1.1 SECTION INCLUDES

A.     Square inline duct fans with alternating current (AC) motors

1.2 RELATED REQUIREMENTS

Specifier Notes: Edit the following list of related sections as required for the Project. Limit the list to sections with specific information that the reader might expect to find in this Section but is specified elsewhere.

A. Section 23 31 00 – HVAC Ducts and Casings.

B. Section 26 05 00 – Common Work Results for Electrical.

1.3 REFERENCE STANDARDS

Specifier Notes: List reference standards used elsewhere in this Section, complete with designations and titles. Delete reference standards from the following list not used in the edited Section.

A. Air Movement and Control Association International (AMCA) (www.amca.org):

1. AMCA 211 – Certified Ratings Program - Product Rating Manual for Fan Air Performance.

2. AMCA 311 – Certified Sound Ratings Program for Air Moving Devices.

B. Underwriting Laboratory (UL) (https://productiq.ulprospector.com/en):

1.     UL 507- Electric Fans

2. CSA 22.2 No 113- Fans and Ventilators

1.4 PREINSTALLATION MEETINGS

Specifier Notes: Edit the Preinstallation Meetings article as required for the Project. Delete article if not required.

A. Convene preinstallation meeting [1 week] [2 weeks] before start of Work of this Section.

B. Require attendance of parties directly affecting Work of this Section, including Contractor, Architect, installer, and manufacturer’s representative.

C. Review the Following:

1. Materials

2. Installation

3. Adjusting

4. Protection

5. Coordination with other Work

1.5 SUBMITTALS

Specifier Notes: Edit the Submittals article as required for the Project. Delete submittals not required.

A. Comply with Division 01.

B. Product Data: Submit manufacturer’s product data, including installation instructions.

C. Shop Drawings: Submit manufacturer’s shop drawings, including plans, elevations, sections, and details.

1. Wiring Diagrams: Indicate wiring for each item of equipment and interconnections between items of equipment.

2. Include manufacturer’s names, model numbers, ratings, power requirements, equipment layout, device arrangement, complete wiring point-to-point diagrams, and conduit layouts.

D. Manufacturer’s Certification: Submit manufacturer’s certification that materials comply with specified requirements and are suitable for intended application.

E. Operation and Maintenance Data:

1. Submit manufacturer’s operation and maintenance manual; including the following:

a. Operation, maintenance, adjustment, and cleaning instructions.

b. Troubleshooting guide

c. Parts list

d. Electrical wiring diagrams if required.

2. Provide detailed information required for Owner to properly operate and maintain equipment.

F. Warranty Documentation: Submit manufacturer’s standard warranty.

1.6 QUALITY ASSURANCE

A.     Manufacturer’s Qualifications: Manufacturer regularly engaged in the manufacturing of square inline duct fans to that specified for a minimum of 10 years.

B.     Installer's Qualifications:

1.     Installer regularly engaged in installation of square inline duct fans of similar type to that specified for a minimum of 5 years.

2.     Use persons trained for installation of square inline duct fans.

1.7 DELIVERY, STORAGE, AND HANDLING

A.     Delivery Requirements: Deliver materials to site in manufacturer’s original, unopened containers and packaging, with labels clearly identifying product name and manufacturer.

B.     Storage and Handling Requirements:

1.     Store and handle materials in accordance with manufacturer’s instructions.

2.     Keep materials in manufacturer’s original, unopened containers and packaging until installation.

3.     Store materials in clean, dry area indoors.

4.     Keep materials from freezing.

5.     Protect materials during storage, handling, and installation to prevent damage.

1.8 WARRANTY

Warranty Period: 5 years

PART 2. PRODUCTS

2.1 MANUFACTURERS

A.     Manufacturer: Fantech Inc., 10048 Industrial Blvd., Lenexa, Kansas 66215. Phone 800-747-6217. www.fantech.net. ussupport@fantech.net.

Specifier Notes: Specify if substitutions will be permitted.

B. Substitutions: [Not permitted] [Comply with Division 01].

C. Single Source: Provide materials from single manufacturer.

2.2 HVAC FANS

A.     Square Inline Duct Fans with alternating current (AC) motors: FSD Series

1. AMCA Air & Sound Seal

2. cULus Listed

Specifier Notes: Specify square inline duct fan models as required for the Project. Delete models not required.

B. Model: “FSD 18”

1. Inlet Dimension: 17-5/8 inches X 17-5/8 inches

2. Outlet Dimension: 17-5/8 inches X 17-5/8 inches

3. Housing Length: 15-3/4 inches

4. Housing Material: Galvanized Sheet Metal

5. Motor: Alternating current external-rotor motor

6. Speed Control: by altering supply voltage via an external stepless controller

7. Motor Protection: electronically protected

8. Blades: Mixed flow

9. Terminal box mounted on housing exterior

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 2,494 cfm

15. RPM: 1,698

16. Power Rating, Motor: 462 W

17. Current: 4.7 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 52.5 lbs

20. Motor Insulation Class: F

21. Motor Enclosure Class: IP54

C. Model: “FSD 20”

1. Inlet Dimension: 19-3/4 inches X 19-3/4 inches

2. Outlet Dimension: 19-3/4 inches X 19-3/4 inches

3. Housing Length: 17-3/4 inches

4. Housing Material: Galvanized Sheet Metal

5. Motor: Alternating current external-rotor motor

6. Speed Control: by altering supply voltage via an external stepless controller

7. Motor Protection: electronically protected

8. Blades: Mixed flow

9. Terminal box mounted on housing exterior

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 3,424 cfm

15. RPM: 1,563

16. Power Rating, Motor: 714 W

17. Current: 6.4 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 67 lbs

20. Motor Insulation Class: F

21. Motor Enclosure Class: IP54

D. Model: “FSD 22”

1. Inlet Dimension: 21-1/2 inches X 21-1/2 inches

2. Outlet Dimension: 21-1/2 inches X 21-1/2 inches

3. Housing Length: 19 inches

4. Housing Material: Galvanized Sheet Metal

5. Motor: Alternating current external-rotor motor

6. Speed Control: by altering supply voltage via an external stepless controller

7. Motor Protection: electronically protected

8. Blades: Mixed flow

9. Terminal box mounted on housing exterior

10. Voltage: 120 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 100 to 130 V

13. Phase: 1

14. Maximum Airflow: 5,015 cfm

15. RPM: 1,576

16. Power Rating, Motor: 1,368 W

17. Current: 11.8 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 96 lbs

20. Motor Insulation Class: F

21. Motor Enclosure Class: IP54

E. Model: “FSD 26”

1. Inlet Dimension: 26 inches X 26 inches

2. Outlet Dimension: 26 inches X 26 inches

3. Housing Length: 20 inches

4. Housing Material: Galvanized Sheet Metal

5. Motor: Alternating current external-rotor motor

6. Speed Control: by altering supply voltage via an external stepless controller

7. Motor Protection: electronically protected

8. Blades: Mixed flow

9. Terminal box mounted on housing exterior

10. Voltage: 460 V

11. Frequency: 50/60 Hz

12. Nominal Voltage Range: 440 to 480 V

13. Phase: 3

14. Maximum Airflow: 7,170 cfm

15. RPM: 1,709

16. Power Rating, Motor: 1,953 W

17. Current: 4 A

18. Operational Temperature: minus 13 to 140 degrees F

19. Weight: 122 lbs

20. Motor Insulation Class: F

21. Motor Enclosure Class: IP54

2.3 ACCESSORIES

A. External Remotely Mounted Speed Controller

Specifier Notes: Delete if not required.

1. Model: WC15

2. Remotely mounted manual-speed control for air flow adjustments and balancing.

3. Voltage: 120V

4. Amperage: 5A max

5. Enclosure class: IP54

B. External Remotely Mounted Speed Controller

Specifier Notes: Delete if not required.

6. Model: RPE10

7. Remotely mounted manual-speed control for air flow adjustments and balancing.

8. Voltage: 120V

9. Amperage: 10A max

10. Enclosure class: IP54

C.     External Remotely Mounted Speed Controller

Specifier Notes: Delete if not required.

11. Model: RPE15

12. Remotely mounted manual-speed control for air flow adjustments and balancing.

13. Voltage: 120V

14. Amperage: 15A max

15. Enclosure class: IP54

PART 3. EXECUTION

3.1 EXAMINATION

A.     Examine areas to receive square inline square duct fans.

B.     Notify Architect of conditions that would adversely affect installation or subsequent use.

C.     Do not begin installation until unacceptable conditions are corrected.

3.2 INSTALLATION

A.     Install square inline duct fans in accordance with manufacturer’s instructions at locations indicated on the Drawings.

B.     Attach duct work to inlet and outlet connection collars of square inline duct fans in accordance with manufacturer’s instructions.

C.     Electrical: Install electrical power to square inline duct fans as specified in Section 26 05 00.

3.3 ADJUSTING

A.     Adjust square inline duct fans for proper operation in accordance with manufacturer’s instructions.

3.4 PROTECTION

A.     Protect installed square inline duct fans from damage during construction.

END OF SECTION

WC 15 Speed control - Fantech
Item #: 411102
WC 15 Speed control

w/on-off switch, surface mount, 120V, 5A

.