FIT 120H® Fresh Air Appliance

Art. no.: 75064

• Airflow up to 112 cfm @ 0.4" PS serves 1 to 3 bedroom homes
• Aluminum core provides superior heat transfer capability
• Easy to install ceiling bracket included

Application

Fantech's low profile HRV is ideally suited for condos and apartments that have no mechanical room and where it must be located over a false ceiling.

How it works

The FIT® 120H brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The FIT® 120H is equipped with automatic defrost mechanisms so you can use your HRV all year round.

In stock earliest delivery 29.02.19 Show availability
  • Aug 29, 2018
  • Sep 09, 2018
  • 500
  • 500

Technical parameters

Product
Voltage (Nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 170 W
Input current 1.4 A
Air flow 112.0 cfm
Static pressure 0.4 in.wg
Certificate CSA, HVI
Exchanger
Exchanger type Heat recovery (aluminium)
Dimensions and weights
Weight 41.9 lb
Used for
Installation placement False ceiling
Heating Supply Temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

60 (28)

66

65

77

0.00

32 (0)

86 (41)

96

64

76

0.01

32 (0)

117 (55)

148

60

71

0.01

-13 (-25)

65 (31)

63

56

81

0.00

A B C D E Duct Size

31 (785)

20 1/4 (515)

10 1/4 (260)

1 7/8 (50)

1/2 (15)

5 (125)

Dimensional information is in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Heat Recovery Core

Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 12” x 12” (305 x 305 mm) with a 7.7” (195 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.

Frost Control

A preset frost control sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

Serviceability

Core, filters, fans, drain pan and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 8” (203 mm) clearance.

Cabinet

24 gauge G90 galvanized steel.

Insulation 

Insulated with 1 in. (25 mm) of foil-faced high density polystyrene foam an 0.25 in. (6 mm) of closed-cell foam on the top of the unit.

Filters 

Two (2) washable electrostatic panel type air filters. Exhaust air filter dimensions 11.2” (284mm) x 7” (176 mm) x 0.125” (3mm). Supply air filter dimensions 11.4” (289mm) x 7.7” (196 mm) x 0.125” (3mm).

Installation 

Unit is typically hung by using ceiling bracket supplied with unit. Optional chain kit available.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• HVI certified
COM5P Supply and Exhaust Hoods Art. no.: 40223 COM5P Supply and Exhaust Hoods $ 45.00 (MSRP)
ECO-TOUCH® Pgrm Wall Control Art. no.: 44929 ECO-TOUCH® Pgrm Wall Control $ 145.00 (MSRP)
EDF1 Multi-Func Ctrl Art. no.: 40375 EDF1 Multi-Func Ctrl $ 50.00 (MSRP)
EDF7 Elec Multi-Funct Dehum Art. no.: 44883 EDF7 Elec Multi-Funct Dehum $ 85.00 (MSRP)
FIDT 5 Insulated Flex Duct Art. no.: 411062 FIDT 5 Insulated Flex Duct $ 47.00 (MSRP)
MDEH1 Low Voltage Dehumidistat Art. no.: 40172 MDEH1 Low Voltage Dehumidistat $ 25.00 (MSRP)
MGE 4 Metal Exhaust Grill Art. no.: 411106 MGE 4 Metal Exhaust Grill $ 21.00 (MSRP)
MGS 5 Metal Supply Grill Art. no.: 411369 MGS 5 Metal Supply Grill $ 26.00 (MSRP)
RTS2 Pushbutton Timer Art. no.: 40164 RTS2 Pushbutton Timer $ 25.00 (MSRP)
RTS5 Pushbutton Timer Art. no.: 44794 RTS5 Pushbutton Timer $ 45.00 (MSRP)