FIT 120E® Fresh Air Appliance

Ceiling-mounted ERV, 106 cfm

Item Number: 44940

• Airflow up to 106 cfm @ 0.4" PS serves 1 to 3 bedroom homes
• Slim design, only 8.75" (222 mm) high
• No drain required
• Easy to install ceiling bracket included
Application

With a profile of only 8.75" high, the FIT® 120E is ideally suited for condos and apartments that have no mechanical room and where it must be located over a false ceiling.

How it works

The FIT® 120E brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. The energy recovery core at the center of the unit transfers heat and moisture from the incoming air to the outgoing air that was cooled and dried by the building's air conditioner.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 170 W
Input current 1.4 A
Air flow 106.0 cfm
Static pressure 0.4 in.wg
Certificate CSA, HVI
Exchanger
Exchanger type Energy recovery (synthetic)
Dimensions and weights
Weight 41.9 lb
Used for
Installation placement False ceiling
Heating Supply Temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)

W

%

%

%

32 (0)

65 (31)

82

65

85

55

32 (0)

85 (40)

112

64

80

50

32 (0)

98 (46)

148

63

78

48

5 (-15)

66 (31)

82

56

80

45

Cooling

95 (35)

47 (22)

82

45*

* Total recovery efficiency

A B C D E Duct diameter

30 1/2 (775)

19 (485)

8 3/4 (222)

2 (21)

1/2 (14)

5" oval

Dimensional information in inches (mm)

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Energy Recovery Core 

AHRI certified core made from water vapor transport durable polymer membrane that is highly permeable to humidity. The ERV core is freeze tolerant and water washable. Core dimensions are 11.5” x 11.5” (290 x 290 mm) with a 7.8” (198 mm) depth.

Frost Prevention 

A preset frost prevention sequence is activated at an outdoor air temperature of 14°F (-10°C) and lower. During the frost prevention sequence, the supply blower shuts down and the exhaust blower switches into high speed to maximize the effectiveness of the frost prevention strategy. The unit then returns to normal operation, and continues cycle.

Serviceability 

Core, filters, fans and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 8” (203 mm) clearance.

Cabinet

24 gauge G90 galvanized steel.

Insulation 

Insulated with 1 in. (25 mm) of foil-faced high density polystyrene foam an 0.25 in. (6 mm) of closed-cell foam on the top of the unit.

Filters 

Two (2) washable electrostatic panel type air filters. Exhaust air filter dimensions 11.2” (284mm) x 7” (176 mm) x 0.125” (3mm). Supply air filter dimensions 11.4” (289mm) x 7.7” (196 mm) x 0.125” (3mm).

Installation 

Unit is typically hung by using ceiling bracket supplied with unit. Optional chain kit available.

Warranty

5 years on energy recovery core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• ERV Core ISO 846 certified for mold and bacteria resistance
• HVI certified
COM5P Supply and Exhaust Hoods Item Number: 40223 COM5P Supply and Exhaust Hoods

5" White Plastic Supply & Exhaust Hoods (pair)

.
ECO-TOUCH® Pgrm Wall Control Item Number: 44929 ECO-TOUCH® Pgrm Wall Control

Touchscreen multi-function dehumidistat

.
EDF1 Multi-Func Ctrl Item Number: 40375 EDF1 Multi-Func Ctrl

Low-Intermittent-High Wall Control

.
FIDT 5 Insulated Flex Duct Item Number: 411062 FIDT 5 Insulated Flex Duct

5" flexible duct, R4.2 Rating, 25ft

.
Filter,MERV6,FIT,Exh,Repl.kit Item Number: 414648 Filter,MERV6,FIT,Exh,Repl.kit

MERV6 Filter kit, FIT120, Exhaust side, 2 pcs, 6.9"x11.18"

.
Filter,MERV8,FIT,Exh,Repl.kit Item Number: 414926 Filter,MERV8,FIT,Exh,Repl.kit

MERV8 Filter kit, FIT120, Exhaust side, 2 pcs, 6.9"x11.18"

.
Filter,MERV8,FIT,Sup,Repl.kit Item Number: 414927 Filter,MERV8,FIT,Sup,Repl.kit

MERV8 Filter kit, FIT120, Supply side, 2 pcs, 7.7"x11"

.
MDEH1 Low Voltage Dehumidistat Item Number: 40172 MDEH1 Low Voltage Dehumidistat

2-wire mechanical dehumidistat, low voltage

.
MGE 5 Metal Exhaust Grill Item Number: 411370 MGE 5 Metal Exhaust Grill

5" duct metal grille w/collar, exhaust

.
MGS 5 Metal Supply Grill Item Number: 411369 MGS 5 Metal Supply Grill

5" duct metal grille w/collar, supply

.
RTS2 Pushbutton Timer Item Number: 40164 RTS2 Pushbutton Timer

20 minutes push-button timer

.
RTS5 Pushbutton Timer Item Number: 44794 RTS5 Pushbutton Timer

Pushbutton Timer, 20/40/60 minutes

.