ECOM Symbol ECOM Symbol ECOM Symbol

VHR 150R HRV

Top duct connection HRV, 159cfm, ENERGY STAR, recirc defrost

Item Number: 99204

• Airflow up to 159 cfm @ 0.4" PS serves 2 to 5 bedroom homes
• Compact top port design
• Internal recirculation defrost
• 6" oval collars
• Integrated airflow measurement system allows for rapid and accurate reading of airflow during installation
Application

Fantech's answer to a heat recovery ventilator (HRV) for house projects that demand higher efficiency, the VHR 150R with oval collars is designed for higher static pressure applications and is Energy Star qualified.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The VHR 150R with oval collars incorporates a unique and quiet internal recirculation defrost that does not depressurize the home during the defrost cycle.

Defrost cycle

During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the house can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 156 W
Input current 1.2 A
Air flow 75 L/s
Static pressure 100 Pa
Certificate ENERGY STAR, CSA, HVI
Exchanger
Exchanger type Heat recovery (aluminium)
Dimensions and weights
Weight 48 lb
Used for
Installation placement Vertical
Images Wiring - VHR 150R HRV - Fantech
Heating Supply temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

85 (40)

70

66

79

-0.01

32 (0)

100 (47)

86

63

79

0.01

32 (0)

187 (88)

156

55

64

0.01

-13 (-25)

89 (42)

99

60

72

0.02

Images Dimensions - VHR 150R HRV - Fantech
A B C D Duct Size

23 3/4 (603)

17 3/16 (437)

16 1/4 (413)

2 3/16 (56)

6 (152)

Dimensional information is in inches (mm).

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Heat Recovery Core

Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 9” x 9” (229 x 229 mm) with a 15” (380 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations. 

Defrost 

The unit incorporates a unique and quiet internal recirculation defrost that does not depressurize the home during the defrost cycle. A preset defrost sequence is activated when the outdoor temperature falls below 23° F (-5° C) and automatically adjusts itself based on operating conditions. The fan speed is also adjusted automatically to provide a smooth and quiet transition between Ventilation & Defrost mode.

Serviceability

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

Duct Connections

6” (152mm) Oval plastic duct connections with integrated balancing damper and airflow measurement ports.

Case

24 gauge galvanized pre-painted steel corrosion resistant

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 8.5” (216mm) x 15” (380mm) x 0.125” (3mm).

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Installation 

Unit is typically hung by using wall bracket supplied with unit. Optional chain kit available.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• HVI certified and ENERGY STAR® qualified*

* This product earned the ENERGY STAR® by meeting strict efficiency guidelines set by Natural Resources Canada and the US EPA. It meets ENERGY STAR® requirements only when used in Canada

COM6P Supply and Exhaust Hoods - Fantech Item Number: 40222 COM6P Supply and Exhaust Hoods

COM6P Hottes en plastique

.
ECO-Feel - Fantech Item Number: 414729 ECO-Feel

ECO mode dehumidistat & IAQ sensor, no display,4 wire

.
ECO-TOUCH - Fantech Item Number: 414728 ECO-TOUCH

LCD touch, multi-function dehumidistat,new generation 4 wire

.
ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

LCD touch multi-function, IAQ sensing&wireless timer, 4 wire

.
Filter,MERV6,150 cfm,Repl.kit - Fantech Item Number: 414647 Filter,MERV6,150 cfm,Repl.kit .
Filter,MERV8,150 cfm,Repl.kit - Fantech Item Number: 414924 Filter,MERV8,150 cfm,Repl.kit

MERV8 Filter kit, 150 cfm, 2 pcs, 8.5"x15"

.
FML6R Riser Hood w/MERV8 filte - Fantech Item Number: 40418 FML6R Riser Hood w/MERV8 filte

FML6R Hotte de Montage

.
HS 6W External Louver Exhaust - Fantech Item Number: 45153 HS 6W External Louver Exhaust

6" Plastic Louver for Exterior Wall Mount

.
MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

MDEH1 Déshumidistat

.
MGE6 Metal Exhaust Grill - Fantech Item Number: 411371 MGE6 Metal Exhaust Grill

MGE6 Grille d'évacuation métal

.
MGS6 Metal Supply Grill - Fantech Item Number: 411242 MGS6 Metal Supply Grill

MGS4 Grille d'air frais métal

.
RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 minute timer with battery - 28X80X132mm

.
RTS2 Pushbutton Timer - Fantech Item Number: 40164 RTS2 Pushbutton Timer

RTS2 Minuterie à bouton

.