ECOM Symbol ECOM Symbol

SHR260RD HRV

Side duct connection HRV, 267 cfm, recirculation defrost

Item Number: 99298

• Airflow up to 267 cfm @ 0.4" PS
• Doors on 2 sides of the cabinet for access to multiple cores
• Removable screw terminal for easy connection
Application

Suitable for very large residential or small commercial applications, the compact SHR 260RD comes with access panels on both sides of the unit for installation versatility. The unit is designed for higher static pressure and higher airflow applications.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The SHR 260RD is equipped with automatic defrost mechanisms so you can use your HRV all year long.

Defrost cycle

During the defrost sequence, a motorized damper temporarily blocks the incoming fresh air stream so that the warm air from the house can circulate through the HRV. The exhaust blower shuts down and the supply blower switches into high speed to maximize the effectiveness of the defrost strategy. During this cycle, household odors from the kitchen or bathroom are prevented from entering the home and the unit will not create negative pressure.

Technical parameters

Product
Voltage (nominal) 120 V
Frequency 60 Hz
Phase(s) 1~
Input power 300 W
Input current 2.5 A
Air flow max 126 L/s
Static pressure 100 Pa
Certificate CSA. HVI
Exchanger
Exchanger type Heat recovery (aluminium)
Dimensions and weights
Weight 79.4 lb
Used for
Installation placement Horizontal
Images Wiring - SHR260RD HRV - Fantech
Heating Supply temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness* Latent recovery/ moisture transfer

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

118 (56)

136

66

77

0.02

32 (0)

162 (76)

182

66

76

0.02

32 (0)

248 (116)

272

64

74

0.03

-13 (-25)

123 (57)

168

67

79

0.05

* Not an HVI Certified Value

Images Dimensions - SHR260RD HRV - Fantech
A B C D E Duct Size

2 1/4 (57)

27 7/8 (708)

2 3/4 (70)

25 1/4 (641)

20 1/2 (521)

8 (203)

Dimensional information is in inches (mm)

Motors

Four (4) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Heat Recovery Core

Two (2) aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 12” x 12” (305 x 305 mm) with a 11,5” (292 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations.

Defrost

The unit incorporates a unique and quiet internal recirculation defrost that does not depressurize the home during the defrost cycle. A preset defrost sequence is activated when the outdoor temperature falls below 23°F (-5°C) and automatically adjusts itself based on operating conditions. The fan speed is also adjusted automatically to provide a smooth and quiet transition between Ventilation & Defrost mode.

Serviceability

Core, filters, fans, drain pan and electrical panel can be accessed easily from the access panel. Core conveniently slides out with only 14” (356 mm) clearance

Case

24 gauge galvanized pre-painted steel corrosion resistant.

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Four (4) washable electrostatic panel type air filters 11,5” (292mm) x 11,4” (290 mm) x 0.125” (3mm).

Controls

External three (3) position (Reduced/Stand By/Normal) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see optional controls)

Installation

Unit is typically hung by using installation kit supplied with unit. Mounting bolts provided on top four (4) corners of unit.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators
• Technical data was obtained from published results of test relating to CSA C439 Standards
• HVI certified
ADC 8 Shut-off Damper w Motor - Fantech Item Number: 44690 ADC 8 Shut-off Damper w Motor

8” motorized damper for circular ducts, 24V

.
ECO-Feel - Fantech Item Number: 414729 ECO-Feel

Dehumidistat & IAQ sensor, w/o display, 4 wire

.
ECO-TOUCH - Fantech Item Number: 414728 ECO-TOUCH

LCD touch, multi-function dehumidistat,new generation 4 wire

.
ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

Touchscreen multi-function dehumidistat, 4 wires

.
EDF1R Multi-Func Ctrl w Recirc - Fantech Item Number: 40393 EDF1R Multi-Func Ctrl w Recirc

Low-Intermittent-Recirculation-High Wall Control

.
FML 8 Metal Hood Supply Air - Fantech Item Number: 45148 FML 8 Metal Hood Supply Air

8" Fixed Metal Hood for Supply or Exhaust Air

.
MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

2-wire mechanical dehumidistat, low voltage

.
RTS-W - Fantech Item Number: 414920 RTS-W

Wireless 20/40/60 min timer w/battery

.