Fantech
This product has been discontinued

SHR 2004 HRV

SHR 2004 HRV

Item #: 40077

Airflow up to 201 cfm @ 0.4" PS serves 7 bedroom homes

Three speed ventilation control

External dry contacts for quick connection of remote controls

Compatible with Fantech's low-voltage controls

Washable electrostatic filters

Application

Fantech's larger residential, full-featured HRV for budget conscious large house projects, the SHR 2004 is designed for higher static pressure and higher airflow applications.

How it works

The unit brings a continuous supply of fresh air into a home while exhausting an equal amount of contaminated air. During winter, fresh incoming air is tempered by the heat that is transferred from the outgoing air so you save on energy costs, while during summer, the incoming air is pre-cooled if the house is equipped with an air cooling system. The SHR 2004 is equipped with automatic defrost mechanisms so you can use your HRV all year long.

Defrost cycle

A preset defrost sequence is activated at an outdoor air temperature of 23°F and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches to high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues the cycle.

Technical parameters

Unit
Frequency 60 Hz
Voltage (nominal) 120 V
Phases 1~
Input current 2.1 A
Input power 150 W
Air flow 95 L/s
Nominal max static pressure 100 Pa
Product type Heat recovery unit
Heat Exchanger
Heat exchanger Heat recovery
Others
Installation type Horizontal
Dimensions and weights
Weight 61.7 lb
Certificates
Certificate CSA, HVI
Heating Supply temperature Net airflow Consumed power Sensible recovery efficiency Apparent sensible effectiveness Latent recovery/moisture transfer  

°F (°C)

cfm (L/s)

W

%

%

-

32 (0)

65 (31)

108

62

77

0.03

 

32 (0)

117 (55)

154

62

72

0.02

 

32 (0)

193 (91)

246

58

68

0.02

 

-13 (-25)

117 (55)

154

59

77

-0.01

 
A B C D E Duct Size          

2 1/4 (57)

27 7/8 (708)

2 5/8 (67)

17 3/8 (441)

20 1/2 (521)

6 (152)

         

Dimensional information is in inches (mm)

         

Fans

Two (2) factory-balanced fans with backward curved blades. Motors come with permanently lubricated, sealed ball-bearings to guarantee long life and maintenance-free operation.

Heat Recovery Core

Aluminum heat recovery core covered by a limited lifetime warranty. Core dimensions are 12” x 12” (305 x 305 mm) with a 15” (380 mm) depth. Our heat exchangers are designed and manufactured to withstand extreme temperature variations. 

Frost Control

A preset frost control sequence is activated at an outdoor air temperature of 23°F (-5°C) and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches into high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues cycle.

Serviceability

Core, filters, fans and drain pan can be easily accessed through latched door. Core conveniently slides out on our new easy glide core guides. 17" (432 mm) of clearance is recommended for removal of core.

Case

24 gauge galvanized steel. Baked power-coated paint for a superior adhesion and resistance.

Insulation

Cabinet is fully insulated with 1” (25 mm) high density expanded polystyrene.

Filters

Two (2) washable electrostatic panel type air filters 11.75” (298mm) x 15” (380mm) x 0.125” (3mm).

Controls

External three (3) position (Low/Stand By/Medium) rocker switch that will offer continuous ventilation. Fantech offers a variety of external controls. (see accessories)

Installation

Unit is typically hung by using installation kit supplied with unit. Mounting bolts provided on top four (4) corners of unit.

Warranty

Limited lifetime on aluminum core, 7 year on motors, and 5 year on parts.

Requirements and standards

Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators

Complies with the CSA C22.2 no. 113 Standard applicable to ventilators

Complies with the CSA F326 requirements regulating the installation of Heat Recovery Ventilators

Technical data was obtained from published results of test relating to CSA C439 Standards

HVI certified

COM6P Supply and Exhaust Hoods - Fantech
Item #: 40222
COM6P Supply and Exhaust Hoods

6" White Plastic Supply & Exhaust Hoods (pair)

.
EDF1 Electronic control - Fantech
Item #: 40375
EDF1 Electronic control

Low / Intermittent / High, 1-gang box mount, 2 wires

.
EDF7 Electronic control - Fantech
Item #: 44883
EDF7 Electronic control

w/dehumidification function, display, surface mount, 2 wires

.
Filter,MERV8,200 cfm,Repl.kit - Fantech
Item #: 414922
Filter,MERV8,200 cfm,Repl.kit

MERV8 Filter kit, 200 cfm, 2 pcs, 11.5"x15"

.
MDEH 1 Dehumidistat - Fantech
Item #: 40172
MDEH 1 Dehumidistat

low voltage, 20-80% RH, surface mount, 2 wires

.
MGE4 Metal Exhaust Grill - Fantech
Item #: 411106
MGE4 Metal Exhaust Grill

4" duct metal grille w/collar, exhaust

.
MGE5 Metal Exhaust Grill - Fantech
Item #: 411370
MGE5 Metal Exhaust Grill

5" duct metal grille w/collar, exhaust

.
MGE6 Metal Exhaust Grill - Fantech
Item #: 411371
MGE6 Metal Exhaust Grill

6" duct metal grille w/collar, exhaust

.
MGS4 Metal Supply Grill - Fantech
Item #: 411368
MGS4 Metal Supply Grill

4" duct metal grille w/collar, supply

.
MGS5 Metal Supply Grill - Fantech
Item #: 411369
MGS5 Metal Supply Grill

5" duct metal grille w/collar, supply

.
MGS6 Metal Supply Grill - Fantech
Item #: 411242
MGS6 Metal Supply Grill

6" duct metal grille w/collar, supply

.
RTS2 Push-button timer - Fantech
Item #: 40164
RTS2 Push-button timer

20 min push-button timer, 1-gang box mount, 2 wires

.
ECO-TOUCH Pgrm Wall Ctrl - Fantech
Item #: 44929
ECO-TOUCH Pgrm Wall Ctrl

Discontinued. Replaced by ECO-Touch IAQ (414727)

.