ECOM Symbol ECOM Symbol

SHR 1200 Heat Rec Ventilator

Side duct connection HRV, 1218 cfm

Item Number: 99272

• Airflow up to 1219 cfm @ 0.4" PS
• Push-pull configuration
• Removable screw terminal for easy connection
• Dual service doors & reversible electrical box
• External three position switch (Low/Standby/High)

The SHR 1200 Commercial Heat Recovery Ventilation system (HRV) complements today's tight buildings.

How it works

Fantech Heat Recovery Ventilators (HRV) are designed to supply air into a building while exhausting an equal amount of contaminated air to the outside. The aluminum heat exchanger core transfers sensible energy between air streams resulting in tempering of the supply air and reduced loads on the HVAC system.

Defrost cycle

A preset defrost sequence is activated at an outdoor air temperature of 23°F and lower. During the defrost sequence, the supply blower shuts down & the exhaust blower switches to high speed to maximize the effectiveness of the defrost strategy. The unit then returns to normal operation, and continues the cycle.

Technical parameters

Frequency 60 Hz
Voltage (nominal) 120 V
Phase(s) 1~
Input current 11.17 A
MCA 13.75 A
MOP 15 A
Input power 1 340 W
Air flow max 575 L/s
Static pressure 100 Pa
Dimensions and weights
Weight 252.4 lb
Certificate CSA, AHRI
Images Wiring - SHR 1200 Heat Rec Ventilator - Fantech Images Wiring - SHR 1200 Heat Rec Ventilator - Fantech
Supply Temperature Net Airflow Net Effectiveness



°F (°C)

cfm (L/s)




35 (1.7)

1035 (488)



35 (1.7)

776 (366)




95 (35)

1035 (488)



95 (35)

776 (366)



Images Dimensions - SHR 1200 Heat Rec Ventilator - Fantech
A B C D E F G I J K Drain Spout

51 2/5 (1306)

47 1/5 (1199)

20 (508)

3 (76)

8 (203)

8 (203)

36 1/4 (921)

22 (559)

32 1/2 (826)

1/2 (13)

Dimensional information is in inches (mm)


Four (4) factory balanced fans with backward curved blades. Motors come with permanently lubricated sealed ball bearings, (TOP) thermal overload protected and maintenance-free operation.

Heat recovery core

Fantech manufactures this fixed plate cross-flow heat exchanger using new 1100 alloy aluminum. Heat exchanger is engineered with a turbulence inducing geometry in order to maximize heat transfer while allowing an effective evacuation of condensate. The plates are hemmed and sealed to ensure no cross-contamination of airstreams. The aluminum core had a plastic handle for easy removal. The SHR 1200 features three cores, each 12" x 12" (305 mm x 305 mm) with a 15" (380 mm) depth.


A preset frost control sequence is initiated if the outdoor temperature falls below the set point of 23°F (-5°C). During the initial stage, the supply blower shuts down & the exhaust blower switches into high speed to eliminate frost build-up in the core. The unit then returns to normal operation for the final stage of the frost control sequence at which time the sequence is repeated if the outdoor air temperatures is still below the set point.


Cores, filters and drain pan can be accessed easily from both sides of the HRV from hinged access panels. Cores conveniently slide out with only 15" (380 mm) clearance. Blowers can be accessed from both side of the HRV from fastened access panels. Blowers are easily removed by taking off the access panel and sliding the motor plates out of the HRV. A quick connect allows for fast inspection of blowers.


22 gauge galvanized steel. Baked powder coated paint.


Insulated with 1in. (25 mm) fiberglass with FSK facing for condensation control.


The exhaust and fresh air streams are protected by MERV1 washable filters constructed to meet UL 900. Optional MERV6 filters are direct replacement to the MERV1. Use of MERV6 filters will add an additional system pressure of 0.76 in.wg (190 Pa) at 1200 cfm (566 l/s). Additional MERV Rated filters available upon request.


External three (3) position (Low/Stand By/High) rocker switch that will offer continuous ventilation. In addition Fantech offers a variety of external controls.


Unit may be suspended by using threaded rod, not supplied, or placed on a platform. Unit shall be adaptable for easy service of electrical components.


Limited lifetime on aluminum core, 3 years on motors, and 3 years on parts.

Requirements and standards
• Complies with the UL 1812 requirements regulating the construction and installation of Heat Recovery Ventilators
• Complies with the CSA C22.2 no. 113 Standard applicable to ventilators
• Technical data was obtained from published results of test relating to AHRI 1060 Standards
BPM 08-20 Bypass module - Fantech Item Number: 99301 BPM 08-20 Bypass module

3-way bypass module for recirculation, 8"x20" duct

CO2RT-R Transmitter - Fantech Item Number: 99315 CO2RT-R Transmitter

0-2000ppm w/relay, room mounting

ECO-Feel - Fantech Item Number: 414729 ECO-Feel

ECO mode dehumidistat & IAQ sensor, no display,4 wire

ECO-TOUCH - Fantech Item Number: 414728 ECO-TOUCH

LCD touch, multi-function dehumidistat,new generation 4 wire

ECO-Touch® IAQ - Fantech Item Number: 414727 ECO-Touch® IAQ

LCD touch multi-function, IAQ sensing&wireless timer, 4 wire

EDF1 Multi-Func Ctrl - Fantech Item Number: 40375 EDF1 Multi-Func Ctrl

EDF1 Déshum multi-fonctions

EDF7 Electronic Dehumidistat - Fantech Item Number: 44883 EDF7 Electronic Dehumidistat

EDF7 Déshum Élec Multi-fonct

EFD 20-8, Damper, TFB24 - Fantech Item Number: 99304 EFD 20-8, Damper, TFB24

20"x8" Shutter damper with spring-return actuators, 24V

Filter,MERV8,1100-1400, - Fantech Item Number: 414934 Filter,MERV8,1100-1400,

MERV8 Filter kit, LC, 1100-1400cfm, 6 pcs, 11.5"x15"

IR4 Iris Damper - Fantech Item Number: 411234 IR4 Iris Damper

IR4 Registre à Iris

IR5 Iris Damper - Fantech Item Number: 411235 IR5 Iris Damper

IR5 Registre à Iris

IR6 Iris Damper - Fantech Item Number: 411236 IR6 Iris Damper

IR6 Registre à Iris

IR8 Iris Damper - Fantech Item Number: 411237 IR8 Iris Damper

IR8 Registre à Iris

MDEH1 Low Voltage Dehumidistat - Fantech Item Number: 40172 MDEH1 Low Voltage Dehumidistat

MDEH1 Déshumidistat

MGE4 Metal Exhaust Grill - Fantech Item Number: 411106 MGE4 Metal Exhaust Grill

MGE4 Grille d'évacuation métal

MGE5 Metal Exhaust Grill - Fantech Item Number: 411370 MGE5 Metal Exhaust Grill

MGE5 Grille d'évacuation métal

MGE6 Metal Exhaust Grill - Fantech Item Number: 411371 MGE6 Metal Exhaust Grill

MGE6 Grille d'évacuation métal

MGE8 Metal Exhaust Grill - Fantech Item Number: 411244 MGE8 Metal Exhaust Grill

MGE8 Grille d'évacuation métal

MGS5 Metal Supply Grill - Fantech Item Number: 411369 MGS5 Metal Supply Grill

MGS5 Grille d'air frais métal

MGS6 Metal Supply Grill - Fantech Item Number: 411242 MGS6 Metal Supply Grill

MGS4 Grille d'air frais métal

MGS8 Metal Supply Grill - Fantech Item Number: 411243 MGS8 Metal Supply Grill

MGS8 Grille d'air frais métal

Replacement filter kit, MERV13 - Fantech Item Number: 414937 Replacement filter kit, MERV13

MERV13 Filter kit, LC, 6 pcs, 11.5"x15"

RTS2 Pushbutton Timer - Fantech Item Number: 40164 RTS2 Pushbutton Timer

RTS2 Minuterie à bouton

RTS5 Pushbutton Timer - Fantech Item Number: 44794 RTS5 Pushbutton Timer

RTS5 Minuterie à bouton